Welcome to Led Online Market!

Led Strip Lights Kit DC12V Power Supply Waterproof SMD 5050

More Views

Led Strip Lights Kit DC12V Power Supply Waterproof SMD 5050

Availability: In stock

1,They can only load 16.4ft. Please don't increase the strip light. Come with RGB LED strips, remote controller, UL listed AC adaptor and connectors. No more accessories are required. Don't leave them on the spool when you going to test it for more than 2 mins, it easy to lead to overheating.The ventilation must be ensured.These lights need an excessive amount of airflow for cooling.
2,44key controller contained a DIY fuction , Press "DIY" botton and then just long press one of the arrow button to set it.Also it have dimming and brightness control. The strip is waterproof.but the control box and adapter are not.Don't put them under the water.
3,Cuttable and linkable. Color changing LED Strip Lights can be cut to every 3 leds, its adhesive tape backing can be fit many dry flat surface
4,It's can be change the color via the controller.It have White/Red/Green/Blue/Yellow and more option.Very suitable for indoor outdoor lighting and decor. Such as kitchen, under cabinet, dining room, bedroom, garden, patio, balcony, party, wedding etc.



Led Strip Lights Kit DC12V Power Supply Waterproof SMD 5050 16.4 Ft (5M) 300leds RGB 60leds/m with 44key Ir Remote Controller for Kicthen Bedroom Sitting Room and Outdoor

Continuous length, packed with 5 meter.Long life span 50,000+ hours and Low power consumption. Run on DC12v. Safe and reliable.
Cuttable every 3 LEDs along the cutting marks, according to requirement.
Flexible ribbon for curving around bends.Ultra-bright but running at low temperature.
Completely smooth and even light spread, solving the uneven luminous problem
Connectale,use a L shape or extension connector if you need to slice the strip.
With back adheisive. Can be stick to anywhere you want to place.
With brightness control,mode selection,and color selection.Even with a DIY function which you can customize your own color.

The connect must be intowards to the arrows before you plug in the power supply.
Don't left them on the spool when you testing them more than 2-3 mins.They need to dissipating heat.
Clean the surface before stick on the strip.If it is not sticky enough, you can add some double sided tape.
The ventilation must be ensured.These lights need an excessive amount of airflow for cooling.

44key remote
Input voltage: 12V DC
Max output current:2A/ each channel
Maximum output power: 72W
Control mode: IR
Dimming mode:PWM
Output: 12V DC, 3 * 2 A
Control distance: 5M (must be a certain degree to aimed at the ir receiver and without any obstacles)
Remote controller dimension: 12.5 * 5.5 * 0.7cm/ 4.92 * 2.17 * 0.28in
DIY function: Click DIY 1. and then long press the up or down key(arrows) untill the expecting color show up.

Strip light
Length: 5meter/16.4ft                            
Led quantity: 300                                  
Color: RGB                                            
Waterproofing grade: IP65                      
Lumen: 10-12lm per led                          
Work temperature: -20~60 degree centigrade
Power supply
Output: 12V
Input: 100-240VAC, 50/60Hz, 1.5A  
Power consumption: 60W  
DC port: 5.5 x 2.5mm (outer diameter x inner diameter)     
Adapter dimension: 104 x 50 x 30mm  
Package included
1 x 5M led strip light
1 x Signal receiver
1 x 44key Control board (with battery)
1 x 12VPower supply

Widely used for home decoration use, hotels, clubs, shopping malls
Architectural decorative lighting, boutique atmosphere lighting
Extensively applied in Backlighting, concealed lighting, channel letter lighting
Emergency & security lighting, advertisement sign lighting
Decorative lights for holiday, event, show exhibition
Applicable for automobile or contour lighting


Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.